GearPro Guide

Image Alt

Blog

How To Clean A Hot Tub

How To Clean A Hot Tub

How To Clean A Hot Tub

When most people think about a hot tub, their minds quickly shift to visions of soaking in bubbling water under a starry sky with a glass of wine and some music piped through your wireless speakers. And yes, that’s all good and well — but what about the hot tub itself?

You see, over time, hot tubs can build up a layer of grime that makes them look less than desirable. And while you might be tempted to just leave it alone and enjoy your time in the water, keep in mind that this buildup can actually cause damage to your hot tub’s shell over time (which could result in expensive repairs down the line).

If you want to keep your hot tub looking as good as new, it’s important to clean and maintain it on a regular basis. And while there are plenty of ways you can go about this task (including hiring a professional), if you’re feeling up to the challenge yourself, here’s what you need to know.

Steps by Step Instruction To Clean a Hot Tub

Follow these simple steps to clean a hot tub:

Inspect Your Hot Tub

Before you start cleaning your hot tub, it’s important to inspect it first. This will help you determine what kind of cleaning supplies and equipment you’ll need. For instance, if you have an acrylic or an inflatable hot tub, you’ll need to be careful with the cleaning supplies you use. Blasting your hot tub with a pressure washer or using harsh chemicals can damage the acrylic surface.

If you have a fiberglass hot tub, however, then you can get away with a bit more heavy-handedness. Once you’ve made your inspection and determined what kind of cleaning supplies you’ll need, then it’s time to start cleaning!

INSPECT YOUR HOT TUB

Drain the Water

As soon as you’ve determined that it’s time to clean your hot tub, the first step is to drain all of the water from it. This will help cut down on the amount of time it takes for you to complete your cleaning project since you won’t have to wait for hours while chemicals work their magic.

You can simply remove the plug at the bottom of your hot tub and let gravity do its thing! You can also use a submersible pump to quickly done with the drainage task. Just make sure that the pump’s outlet hose is long enough to run through the drainage.

Flush Out Plumbing Line

After you’ve drained your hot tub, the next step is to flush out the plumbing lines. You can do this by simply turning on the jets and running water through each hose until it comes out clean. This will remove any debris that may be clogging up your system. If you notice that there are still some particles left behind after flushing, don’t worry! Just use a pipe cleaner or some other type of scrubbing tool to minimize the dirt accumulation.

Clean the Outer Shell

The next step is to clean your hot tub’s outer shell. This will help prevent any mold or mildew from forming on your hot tub’s walls, which can damage its structural integrity. To start, grab a cleaning solution and a soft rag, then use the rag to wipe down every inch of your hot tub’s outer shell. If you’re unsure of where to begin, start with the jets first. Next, move on to the walls and seats before finishing off with the filter and plumbing system.

Pay Attention to the Filters

Most people often forget about the filters when they’re cleaning their hot tubs. However, if you want to prevent your filters from getting clogged with debris, then they need to be cleaned as well. To do so, simply remove the filter housing unit and soak it in a bucket filled with warm water before rinsing off any dirt or debris that may have accumulated on it.

Once you’ve finished cleaning the filter housing unit, be sure to reattach it back onto your hot tub’s plumbing system before turning on the pump again. It’s important to note that you must change the filters of your hot tub every three months. If you don’t, then it’s likely that they will become clogged with debris and start to impede water flow which can be hazardous to your health.

 How to clean a hot tub

Refill the Tub

Once you’ve finished cleaning your hot tub, be sure to refill it with water. Add the chemicals to the hot tub and run the pump for at least an hour before using it again. This will help to circulate the chemicals throughout your spa so that they can be properly dispersed throughout its water.

Now before you get all excited and start using your spa again, be sure to test the water’s pH levels. This will ensure that you’ve done a good job of balancing your hot tub’s chemicals. The chlorine level should be between 1 ppm and 3 ppm, while the pH should range between 7.2 and 7.8.

If your water doesn’t meet these levels, add alkaline or sodium bisulfate and run the pump for another hour or so until it does. Afterward, you’ll be able to enjoy your spa without any problems!

Final Words

Hot tubs are an excellent way to relax and unwind after a long day. However, they can also be dangerous if you aren’t properly educated on their use and maintenance. The tips we’ve provided above will help you keep your hot tub running smoothly for years to come!

Post a Comment